Avo GT86 Fuel Bucket Assembly with 265 L/Hr Pump

The Avo fuel bucket assembly provides more volume of fuel around the pump than the standard assembly. It is required when running high horsepower forced induction where the engines demand for fuel can empty the standard pot in seconds. Having more fuel volume also helps with fuel surge on high G corners.

Inside the assembly is a 265 litre per hour high capacity pump with a bottom mount filter and a more direct outlet. Testing has shown over 40L/Hr improvement in fuel flow compared to standard.

The assembly also has a return port and a regulator plug if you wish to install a return type fuel system.

Note:  Wiring is required for pump power (4 terminals)
This assembly does not have the fuel level sensor - it is possible to mount the original sensor you will need to drill the assembly and mount the oe sensor, fixings and wiring is not supplied.
Can be used with either standard fuel lines or uprated dash 6 or 8 braided lines (not supplied).

- Wiring is require for pump power (4 terminals) - This assembly does not have the fuel level sensor - it is possible to mount the original sensor you will need to drill the assembly and mount the oe sensor, fixings and wiring is not supplied. - Can be used with either standard fuel lines or uprated dash 6 or 8 braided lines (not supplied).